New version of kwull´s iphone lock is available, and its provably the greatest release so far - now we get call and sms notifications, and battery consumption is finally controled! Get it here.
Note: kwull now accepts donations to support this great app development through his site.
[thanks to anagarika from my-symbian for the heads up]
Changelog, translated through google:
+ After blocking now returns to the same application / state that was before the lock
+ Now the screen backlight should behave normally (except backlight keys on p1/w960)
+ Displays number neprochitanyh SMS / MMS / Email (I checked only SMS / MMS, please check with the case EMail)
+ Displays missed calls, believes only missed when blocking (which was before the lock, ignores), with manual unlock - dumped.Cancelled during a blocking call is considered a missing
+ To ini parameter added HiddenTaskMode - hides application from the list of targets
+ If idleTimeOut = 0 and StartOnBackground = 1, the program works in the background and avtoblokirovka time inoperative
+ If TimeToDisplayOffAfterLock = 0, the screen is not extinguishes after the block. Now, this value must be a multiple of 10! Works not very precise, error of approximately 10 seconds smile.gif
+ To ini parameter added UsePowerSaving: 1 - using energy-saving mode, 0 - disabled energy saving
+ Added in the ini settings and ScreenActiveOnMobiReader ScreenActiveOnCorePlayer: 1 - not extinguish the screen with the active or MobiReader CorePlayer, 0 - disable this feature
+ Added in the ini settings and NotLockOnMobiReader NotLockOnCorePlayer: 1 - not to block the active MobiReader or CorePlayer, 0 - disable this feature
+ To ini parameter added LockOnlyOnStandByOrGDesk: 1 - automatically block only with the active standby or GDesk, 0 - otlyuchit this opportunity. NotLockOnCorePlayer. This option has a higher priority than NotLockOnMobiReader and NotLockOnCorePlayer.
+ To ini added Section LockedKeys - in what it described key block: 1 - block, 0 - not to block
+ To ini parameter added TurnOnDisplayOnTouch: 1 - include touching the screen with, 0 - do not include
+ To ini parameter added AutoStartOnBoot: 1 - iPhoneLock load at boot phone (works even if, in addition enabled StartOnBackground), 0 - not to download
+ To ini parameter added ShowBatteryLevel: 1 - shows the level of battery in% 0 - disabled
36 Comments Received
April 29th, 2008 @11:22 pm
this is a great news
thnx for the updates…
April 30th, 2008 @12:23 am
Email-notifications don’t work, but that doesn’t matter. This is one hell of a program :)!
April 30th, 2008 @4:13 am
hi! i have a problem. when i’m trying to install the application, a message appear and saying “a required capability is not signed for”. what i have to do? thanks
April 30th, 2008 @11:48 am
sign the app
April 30th, 2008 @12:34 pm
Where do we sign it?
April 30th, 2008 @3:07 pm
Rahul:
Start from here https://www.symbiansigned.com/app/page. On the net you’ll find lots of guides how to sign the program successfully.
Does anyone know how to get the emails to work? I have three accounts, one of them is Gmail..
April 30th, 2008 @8:31 pm
Wow! this version is much more stable…
Great work by Kwull, and thanks to ares for letting us know
May 1st, 2008 @2:18 pm
nice version but when i enable it on my p1i, suddenly my phone shuts down.any of you experienced this?
May 2nd, 2008 @4:16 pm
HELP.. when i try to install iphonelock 0.50 at SE M600i.. there was an error message.. it says : “a required capability is not signed for” any one can help me how to install it in my SE m600i.. thx before..
May 3rd, 2008 @7:32 pm
The app is great but if you have the in built phone lock on and the iphone lock you cannot unlock the phone. The iphone lock prevents me from putting any numbers into the phone lock field.
May 3rd, 2008 @11:14 pm
Battery is going down as you just look at it. The app is super, but lifetime on the battery is less than 24 hours on my W960 with this installed.
May 11th, 2008 @1:39 am
There was a previous post to explain how to change the background.. go to the shared folder and change the skin.mbm file. However, after I do that, when I try to run the application, it closes with an error.. “Reason code KERN-EXEC, Reason code 3″ Can anyone help?
May 13th, 2008 @7:53 pm
Hi,
Little problem here… i allready had IphoneLock on my P1i, but never knew how to install it. I can open it from my memo-stick, but i can’t install it as my screensaver. Any one who could help me with this? ( such as, wich map you’ll have to put it in and how to install)
Ps. I’m dutch, so i hope you an decode it…
May 14th, 2008 @3:24 am
Allready solved… reading is hard for me I guess.
Wrong file, had to be SIS, I had JAR… Thats why i could not sign it @ symbian… So it works properly at the moment!!
May 16th, 2008 @4:35 am
hi all!
i uploaded a modded skin file with the bg of the theme Green Sunny Day by FlamEmo.
have fun!
(191kb)
May 17th, 2008 @4:11 pm
its a great application!!!works fine in my P1i….UIQ rules!!!!thanks for the upload man!!!hope more applications to ome and i know there more!!!!hahahaha
May 17th, 2008 @4:15 pm
its so easy to signed in!just follow what tuomas post…the email notification is fast…but limited time for download…
May 17th, 2008 @8:39 pm
I found out something about this app.these are my questions.
1. Why is it that every time i turn on my p1i even these app. is already installed it will ask again to install?but i just exit it.
2. Why is it On fist time i turn on my p1i and i click the shortcut icon for these iphonelock it only prompt to launched but it will not launched?ihave to click again the iphonelock icon to launched it.
3. Why is it that the automatic lock of this app. will only start after you launched it ones?
“but i like this app. good work guys!hope this questions will be answer”so That the prob. will be fix!warm regards to all!UIQ RULEZZZZ!!!!
May 18th, 2008 @10:39 am
one problem also.when im going to charge my p1i when i plug in the charger still the message “install iphonelock v 0.20″ is appearing!what is this?and the charging will not proceed it will hung on the booting part!i uninstalled the iphonelock v 0.50 and charged it again but same problem appeared.iremove the memory card of my phone and charged it again this time no problem has occured.why is this happening?im using this iphonelock v 0.50 but why there is appearing install iphonelock v 0.20?can some one help me on this?
May 18th, 2008 @6:49 pm
one problem also.when im going to charge my p1i when i plug-in the charger still the message “install iphonelock v 0.20″ is appearing but i just cancel the installation!what is this?i also remove the installer in my phone!and the charging will not proceed it will hung on the booting part!i uninstalled the iphonelock v 0.50 and charged it again but same problem appeared.iremove the memory card of my phone and charged it again this time no problem has occured.why is this happening?im using this iphonelock v 0.50 but why there is appearing install iphonelock v 0.20?can some one help me on this?
May 21st, 2008 @3:28 pm
Nice update, a real improvment! Great work
May 21st, 2008 @6:06 pm
ANDREAS,did you install this to your phone?did you notice the problems above that i ipost?
May 21st, 2008 @11:05 pm
there is no problem!after i update my p1i firmware all is to go.ihave wplayer v3.0, animator,new swissmng,iphonelock v0.50…hope new applications to come!!!uiq ruleeezzzzzz!!!!
May 22nd, 2008 @2:44 am
i have a w960i and i have a few questions about this as well it doesnt work when you manually lock the fone… it only automaticaly locks after run the app..and i notice the default lock is still in effect… i think the ilock is really a screensaver hence i have to disable my auto lock then run the iphone when ma fone starts up….another quick suggestion is there neway to get it to autorun when the phone starts
May 22nd, 2008 @2:53 am
i guess my last question shud how do i access the ini file… do i have download some private folder access.. and even then where do i look for the file
May 22nd, 2008 @1:21 pm
@wyzard
The .ini file can be located at D:\Shared\iPhoneLock
Cheers!
May 24th, 2008 @11:10 pm
you need a tool to access the ini. file
May 25th, 2008 @2:28 am
how long does it take for the file to be mailed back by symbian signed?
June 1st, 2008 @11:14 pm
the signed file should be sent to you after few minutes,it will notify you that your file is already signed and it will gain 2-3kb.UIQ RULEEZZZZ!!!
June 3rd, 2008 @2:13 pm
My installation of version 0.50 was successful on the phone but when I unlock it, the phone brightness of my back light goes down super low.
Did anyone face the same problem. Please some one give me a solution.
Cheers
June 19th, 2008 @11:21 pm
karthik!you have to reinstall the Iphonelock,but before doing this.do a master reset of your phone to fix the bug,then install the iphonelock!UIQ RULEEEZZZZ!!!!!
July 22nd, 2008 @8:28 pm
@ giwrgos :
i do have the same problems also ( “a required capability is not signed for”).
how do you solve this?
hope you could help us guys.
thanks in advance.
October 13th, 2008 @6:47 am
Hi! I had a little probleme. The app’s working fine, but it says, I have 927 unreaded messages. But I haven’t. What did I do wrong? Thx!
October 30th, 2008 @1:08 pm
y cant i change the background of this version? ive olready put new skin but still the clown fish is been used. even i erased the default skin and not put anything the clown fish still been used. y is that so???? or is it because its a signed sis u cannot overwrite the data?
November 4th, 2008 @10:52 pm
yes i have something like tkarika’s problem too!!
Everything works fine with the lock…. only things is it is showin i have 1 unread sms. but actually no new sms.i reinstalled it but din work.i uninstalled,restarted,installed again but did not work too.What shud i do to rectify this problem?
Thanks for this great app!!!
December 3rd, 2008 @4:00 pm
Not able to install in W960.. HELP PLZ..
Error Msg comes : “A required capability is not signed for.”
Leave A Reply